Yamaha MT-07 Tracer 7 GT Y-AMT – MT-07-TRGTYAMT/26 (2025–Present) Factory Oil & Tire Pressure Data

Component Specification
Engine Type CP2 Parallel-Twin (270-degree Crank)
Model Year 2025–Present
Engine Oil Yamalube 4 10W-40 (2.60 L)
Front Tire 120/70 ZR 17 M/C (58W)
Rear Tire 180/55 ZR 17 M/C (73W)
Battery YTZ10S
Spark Plug NGK LMAR8A-9

Engineering Highlight: The Evolution of the 270° Crank

The MT-07 Tracer 7 GT Y-AMT represents a pivotal moment in Yamaha’s ‘Crossplane Concept’ history. While the CP2 engine originally gained fame for its linear torque delivery and V-twin-like firing order (inspired by the legendary TRX850), the 2025 Y-AMT variant (MT-07-TRGTYAMT) introduces the first automated manual transmission to this platform. This system eliminates the traditional foot-shifter and clutch lever, utilizing two electric actuators to handle shifting and clutch engagement in under 0.1 seconds, bridging the gap between touring comfort and sport-naked agility.

Technical Review: Performance Meets Automation

At MotoSpecsLab, we evaluate the Tracer 7 GT Y-AMT as more than just a middleweight tourer. The inclusion of the Y-AMT system allows riders to toggle between ‘D’ (Drive) for relaxed touring and ‘D+’ for aggressive gear holding. Despite the added electronics, the bike retains its lightweight chassis, making it one of the most flickable sport-tourers in its class. The GT trim specifically adds high-density side cases and a touring windscreen, optimizing the CP2 platform for long-distance stability.

Maintenance Roadmap & Specifications

To maintain the integrity of the Y-AMT system and the CP2 engine, adherence to technical specifications is non-negotiable for long-term reliability.

Lubrication System

The MT-07-TRGTYAMT requires 2.60 Liters of Yamalube 4 10W-40. It is critical to use oil meeting JASO MA standards to ensure the automated clutch actuators operate without slippage or thermal degradation.

Ignition & Electrical

The high-compression CP2 engine utilizes NGK LMAR8A-9 spark plugs. The gap must be precisely set between 0.8–0.9 mm to prevent misfires that could disrupt the Y-AMT shifting logic. The electrical load from the shifting actuators is supported by a YTZ10S battery; maintaining a full charge is essential for reliable gear engagement.

Tires & Handling

The Tracer 7 GT is equipped with 17-inch alloy wheels. For optimal contact patch and heat dissipation during touring, maintain the following pressures:

  • Front: 120/70 ZR 17 (2.25 bar / 33 psi)
  • Rear: 180/55 ZR 17 (2.50 bar / 36 psi)

Frequently Asked Questions

Can I shift gears manually on the Y-AMT?

Yes, the Y-AMT features a see-saw switch on the left handlebar, allowing for manual sequential shifts without a foot lever.

What is the oil capacity for a filter change?

The total capacity is approximately 2.60 liters, though we recommend checking the sight glass after 2.3 liters during a standard service.

Leave a Comment