Honda Cross Cub 110 (JA60) — OEM Fluid, Tire Pressure & Maintenance Specs
109cc Air-Cooled Horizontal Single SOHC 2V 4-Speed Semi-Auto · Source: Honda Cross Cub 110 (JA60) (2022–Present) Official Owner’s Manual Maintenance Specifications
According to the Honda Cross Cub 110 (JA60) (2022–Present) Official Owner’s Manual Maintenance Specifications, the 2022–Present Honda Cross Cub 110 (JA60) (chassis JA60) requires 0.8 L (0.85 US qt) of SAE 10W-30 (JASO MA, API SJ or higher) engine oil for a drain-only change and 0.85 L (0.90 US qt) with filter service (15412-MGS-D21 / HF117). Standard solo cold tire pressure is 200 kPa / 2.00 bar / 29 PSI front (80/90-17M/C 44P) and 225 kPa / 2.25 bar / 33 PSI rear (80/90-17M/C 44P), paired with 1× NGK CPR7EA-9S / CPR6EA-9 spark plug(s) and a YTZ5S / YTX4L-BS battery.
Drain only: 0.8 L (0.85 US qt)
R 225 kPa (2.25 bar)
Est. Range: ~254 km (158 mi)
1. Engine Lubrication, Filter & Clutch Specifications
| Clutch Architecture | Wet Centrifugal Semi-Auto Clutch NEVER use JASO MB |
|---|---|
| Recommended Viscosity & Grade | SAE 10W-30 (Alt: SAE 10W-40) · JASO MA · API SJ or higher |
| Oil Volume (Drain / With Filter / Overhaul) |
• Drain only: 0.8 L (0.85 US qt) • With filter/strainer: 0.85 L (0.90 US qt) • Complete dry overhaul: 1 L (1.06 US qt) |
| OEM Oil Filter Code & Type | 15412-MGS-D21 / HF117 |
| Correct Oil Level Check Method | Hold upright on level ground; rest dipstick UNTHREADED on filler neck (do NOT screw in) |
| Oil Drain Bolt Torque | 24 N·m (17.7 lb-ft / 2.45 kgf·m) — Use fresh crush washer |
2. Cold Tire Pressures, Wheels, Ignition & Drivetrain
| Front / Rear OEM Tire Sizes | Front: 80/90-17M/C 44P · Rear: 80/90-17M/C 44P (Tubeless) |
|---|---|
| Cold Tire Pressure — Solo Riding |
Front: 200 kPa / 2.00 bar / 29 PSI Rear: 225 kPa / 2.25 bar / 33 PSI |
| Cold Tire Pressure — 2-Up / Loaded Touring |
Front: 200 kPa / 2.00 bar / 29 PSI Rear: 280 kPa / 2.80 bar / 41 PSI |
| OEM Spark Plug & Quantity | NGK CPR7EA-9S / CPR6EA-9 × 1 (Gap: 0.8–0.9 mm) |
| OEM Battery Code & Rating | YTZ5S / YTX4L-BS (12V 3.5Ah MF AGM) |
| Final Drive Maintenance | 428 Drive Chain — Maintain 20–30 mm slack and lubricate regularly |
| Brake Fluid & Coolant | DOT 4 · Air/Oil-Cooled Engine (No liquid coolant) |
3. Ergonomics, Range & Scheduled Service Intervals
| Displacement · Max Power · Peak Torque | 109 cc · 8 hp @ 7,500 rpm · 8.8 N·m (6.5 lb-ft) @ 5,500 rpm |
|---|---|
| Seat Height & Wet Curb Weight | 784 mm (30.9 in) · 107 kg (236 lbs) |
| Fuel Tank & Est. Real-World Range | 4.1 L (1.1 US gal) · ~62 km/L → ~254 km (158 mi) |
| OEM Scheduled Maintenance Intervals |
• First Break-In: 1,000 km • Engine Oil / Filter: 6,000 km / 12,000 km • Air Filter / Spark Plug: 16,000 km / 12,000 km • Valve Clearance Check: 8,000 km |
4. Generation Cutoffs & Real-World Wrenching Gotchas
Model-Year & Chassis Generation Notes
Major 2022 upgrade (chassis JA60) over the spoked/drum JA45, bringing the long-stroke 109cc engine with a cartridge paper oil filter (HF117), tubeless cast wheels, and front disc ABS.
Oil & Clutch Mechanical Engineering Note
Uses dual wet centrifugal and multiplate clutches bathed in crankcase oil—never pour JASO MB scooter oil; strictly fill 0.85 L of SAE 10W-30 JASO MA when changing filter HF117.
Garage Wrenching Gotchas
- Without legshields, spark plug and HF117 oil filter access is wide open, but mud thrown off the front tire packs directly into the horizontal cylinder cooling fins.
- OEM semi-knobby 80/90-17 tires trade wet-asphalt grip for gravel bite—avoid locking the rear drum in rain and raise rear pressure to 280 kPa with camping cargo.
5. Frequently Asked Questions (FAQ)
What oil volume, JASO grade, and oil filter code does the Honda Cross Cub 110 (JA60) (2022–Present) require?
Because its wet multi-plate clutch shares engine oil with the gearbox, run SAE 10W-30 (JASO MA) at 0.8 L (0.85 US qt) drain-only and 0.85 L (0.90 US qt) with filter (15412-MGS-D21 / HF117).
How do you accurately check the oil level on the Cross Cub 110 (JA60), and what are its service intervals?
Hold the bike upright on level ground 2–3 minutes after shutdown, wipe the dipstick, and rest it on the filler threads without screwing it in (threading it in reads artificially high and risks oil starvation). Torque the drain plug to 24 N·m with a new crush washer. Factory oil change intervals are every 6,000 km, with valve clearance inspection every 8,000 km.
What are the cold tire pressures, puncture repair type, seat height, and range of the Cross Cub 110 (JA60)?
Fitted with 80/90-17M/C 44P front and 80/90-17M/C 44P rear tubeless rims (compatible with roadside plug kits), set cold tire pressures to 29 / 33 PSI (200/225 kPa) solo or 29 / 41 PSI loaded. Seat height is 784 mm (30.9 in) at 107 kg wet weight, delivering ~254 km per 4.1 L tank.