Kawasaki Versys-X 300 — OEM Fluid, Tire Pressure & Maintenance Specs
296cc Liquid-Cooled Parallel-Twin DOHC 8-Valve (19-Inch Spoke Wheel · Slipper Clutch) · Source: Kawasaki Versys-X 300 (2017–Present) Official Owner’s Manual Maintenance Specifications
According to the Kawasaki Versys-X 300 (2017–Present) Official Owner’s Manual Maintenance Specifications, the 2017–Present Kawasaki Versys-X 300 (chassis KLE300B/KLE300C) requires 1.8 L (1.90 US qt) of SAE 10W-40 (JASO MA2, API SG/SJ/SL) engine oil for a drain-only change and 2.2 L (2.32 US qt) with filter service (16097-0008 / HF303). Standard solo cold tire pressure is 200 kPa / 2.00 bar / 29 PSI front (100/90-19 M/C 57S) and 225 kPa / 2.25 bar / 33 PSI rear (130/80-17 M/C 65S), paired with 2× NGK CR8E spark plug(s) and a YTX9-BS battery.
Drain only: 1.8 L (1.90 US qt)
R 225 kPa (2.25 bar)
Est. Range: ~417 km (259 mi)
1. Engine Lubrication, Filter & Clutch Specifications
| Clutch Architecture | Wet Multi-Plate Manual Clutch NEVER use JASO MB |
|---|---|
| Recommended Viscosity & Grade | SAE 10W-40 (Alt: SAE 10W-50) · JASO MA2 · API SG/SJ/SL |
| Oil Volume (Drain / With Filter / Overhaul) |
• Drain only: 1.8 L (1.90 US qt) • With filter/strainer: 2.2 L (2.32 US qt) • Complete dry overhaul: 2.4 L (2.54 US qt) |
| OEM Oil Filter Code & Type | 16097-0008 / HF303 |
| Correct Oil Level Check Method | Hold bike upright on level ground 3–5 min after warm shutdown; read crankcase sight glass |
| Oil Drain Bolt Torque | 20 N·m (14.8 lb-ft / 2.04 kgf·m) — Use fresh crush washer |
2. Cold Tire Pressures, Wheels, Ignition & Drivetrain
| Front / Rear OEM Tire Sizes | Front: 100/90-19 M/C 57S · Rear: 130/80-17 M/C 65S (Tube-Type Spoke Rim) |
|---|---|
| Cold Tire Pressure — Solo Riding |
Front: 200 kPa / 2.00 bar / 29 PSI Rear: 225 kPa / 2.25 bar / 33 PSI |
| Cold Tire Pressure — 2-Up / Loaded Touring |
Front: 200 kPa / 2.00 bar / 29 PSI Rear: 250 kPa / 2.50 bar / 36 PSI |
| OEM Spark Plug & Quantity | NGK CR8E × 2 (Gap: 0.8–0.9 mm) |
| OEM Battery Code & Rating | YTX9-BS (12V 8.0Ah MF AGM) |
| Final Drive Maintenance | 520 Sealed O/X-Ring Chain — Maintain 25–35 mm slack and lube every 800–1,000 km |
| Brake Fluid & Coolant | DOT 4 · Silicate-free ethylene-glycol OAT coolant for aluminum radiators (50:50 premix) |
3. Ergonomics, Range & Scheduled Service Intervals
| Displacement · Max Power · Peak Torque | 296 cc · 40 hp @ 11,500 rpm · 25.7 N·m (19.0 lb-ft) @ 10,000 rpm |
|---|---|
| Seat Height & Wet Curb Weight | 815 mm (32.1 in) · 175 kg (386 lbs) |
| Fuel Tank & Est. Real-World Range | 17 L (4.5 US gal) · ~24.5 km/L → ~417 km (259 mi) |
| OEM Scheduled Maintenance Intervals |
• First Break-In: 1,000 km • Engine Oil / Filter: 12,000 km / 12,000 km • Air Filter / Spark Plug: 18,000 km / 12,000 km • Valve Clearance Check: 24,000 km |
4. Generation Cutoffs & Real-World Wrenching Gotchas
Model-Year & Chassis Generation Notes
Introduced in 2017 (KLE300B/C), pairing the rev-happy 296cc Ninja 300 parallel twin with a dedicated backbone chassis, long-travel suspension, and 19/17-inch wire-spoke wheels.
Oil & Clutch Mechanical Engineering Note
Cruising at 110 km/h spins the short-geared 296cc twin near 8,500 rpm continuously; check the 2.2 L (w/ HF303) SAE 10W-40 JASO MA2 sight glass before and after long highway stints.
Garage Wrenching Gotchas
- Factory 19/17-inch wire-spoke rims require inner tubes—tubeless plug kits will not work roadside, so carry spare tubes and spoons on backcountry trails.
- Remove accessory aluminum skid plates completely before draining the sump (20 N·m) and spinning off the front HF303 oil filter.
5. Frequently Asked Questions (FAQ)
What oil volume, JASO grade, and oil filter code does the Kawasaki Versys-X 300 (2017–Present) require?
Because its wet multi-plate clutch shares engine oil with the gearbox, run SAE 10W-40 (JASO MA2) at 1.8 L (1.90 US qt) drain-only and 2.2 L (2.32 US qt) with filter (16097-0008 / HF303).
How do you accurately check the oil level on the Versys-X 300, and what are its service intervals?
Hold the motorcycle dead-vertical on level ground 2–3 minutes after warm shutdown and verify the oil sits mid-way between the Upper and Lower marks in the crankcase sight glass—never on the sidestand. Torque the drain plug to 20 N·m with a new crush washer. Factory oil change intervals are every 12,000 km, with valve clearance inspection every 24,000 km.
What are the cold tire pressures, puncture repair type, seat height, and range of the Versys-X 300?
Equipped with 100/90-19 M/C 57S front and 130/80-17 M/C 65S rear tube-type rims (mushroom/string plugs will not seal—carry spare inner tubes), set cold tire pressures to 29 / 33 PSI (200/225 kPa) solo or 29 / 36 PSI loaded. Seat height is 815 mm (32.1 in) at 175 kg wet weight, delivering ~417 km per 17 L tank.