Yamaha Fazzio 125 Hybrid — OEM Fluid, Tire Pressure & Maintenance Specs
125cc Forced Air-Cooled Single SOHC 2-Valve Blue Core Hybrid · Source: Yamaha Fazzio 125 Hybrid (2022–Present) Official Owner’s Manual Maintenance Specifications
According to the Yamaha Fazzio 125 Hybrid (2022–Present) Official Owner’s Manual Maintenance Specifications, the 2022–Present Yamaha Fazzio 125 Hybrid (chassis BEJ/B3T) requires 0.8 L (0.85 US qt) of SAE 10W-40 (JASO MB, API SG or higher) engine oil for a drain-only change and 0.8 L (0.85 US qt) with filter service (B65-E3411-00 (Oil Strainer Screen)). Standard solo cold tire pressure is 175 kPa / 1.75 bar / 25 PSI front (110/70-12 47L) and 200 kPa / 2.00 bar / 29 PSI rear (110/70-12 47L), paired with 1× NGK CR6HSA spark plug(s) and a YTZ6V / YTZ7V battery.
Drain only: 0.8 L (0.85 US qt)
R 200 kPa (2.00 bar)
Est. Range: ~270 km (168 mi)
1. Engine Lubrication, Filter & Clutch Specifications
| Clutch Architecture | Dry Centrifugal CVT Belt Drive |
|---|---|
| Recommended Viscosity & Grade | SAE 10W-40 (Alt: SAE 10W-30) · JASO MB · API SG or higher |
| Oil Volume (Drain / With Filter / Overhaul) |
• Drain only: 0.8 L (0.85 US qt) • With filter/strainer: 0.8 L (0.85 US qt) • Complete dry overhaul: 0.84 L (0.89 US qt) |
| OEM Oil Filter Code & Type | B65-E3411-00 (Oil Strainer Screen) |
| Correct Oil Level Check Method | Hold upright on level ground; rest dipstick UNTHREADED on filler neck (do NOT screw in) |
| Oil Drain Bolt Torque | 20 N·m (14.8 lb-ft / 2.04 kgf·m) — Use fresh crush washer |
| Final Drive / Bevel Gear Oil | 100 ml (0.10 L) — SAE 10W-40 JASO MB (100 ml rear gear oil) |
2. Cold Tire Pressures, Wheels, Ignition & Drivetrain
| Front / Rear OEM Tire Sizes | Front: 110/70-12 47L · Rear: 110/70-12 47L (Tubeless) |
|---|---|
| Cold Tire Pressure — Solo Riding |
Front: 175 kPa / 1.75 bar / 25 PSI Rear: 200 kPa / 2.00 bar / 29 PSI |
| Cold Tire Pressure — 2-Up / Loaded Touring |
Front: 175 kPa / 1.75 bar / 25 PSI Rear: 225 kPa / 2.25 bar / 33 PSI |
| OEM Spark Plug & Quantity | NGK CR6HSA × 1 (Gap: 0.8–0.9 mm) |
| OEM Battery Code & Rating | YTZ6V / YTZ7V (12V 5.3–6.0Ah MF AGM) |
| Final Drive Maintenance | Dry V-Belt CVT Drive — Inspect/replace V-belt and rollers every 20,000–24,000 km |
| Brake Fluid & Coolant | DOT 4 · Forced Air-Cooled Engine (No liquid coolant) |
3. Ergonomics, Range & Scheduled Service Intervals
| Displacement · Max Power · Peak Torque | 125 cc · 8.4 hp @ 6,500 rpm · 10.6 N·m (7.8 lb-ft) @ 4,500 rpm |
|---|---|
| Seat Height & Wet Curb Weight | 750 mm (29.5 in) · 95 kg (209 lbs) |
| Fuel Tank & Est. Real-World Range | 5.1 L (1.3 US gal) · ~53 km/L → ~270 km (168 mi) |
| OEM Scheduled Maintenance Intervals |
• First Break-In: 1,000 km • Engine Oil / Filter: 4,000 km / 8,000 km • Air Filter / Spark Plug: 12,000 km / 8,000 km • Valve Clearance Check: 12,000 km |
4. Generation Cutoffs & Real-World Wrenching Gotchas
Model-Year & Chassis Generation Notes
Debuting in 2022 on chassis BEJ, the Fazzio 125 shares the air-cooled Blue Core Hybrid powertrain with Grand Filano but relocates a 5.1 L fuel tank under the seat at just 95 kg wet.
Oil & Clutch Mechanical Engineering Note
Holding just 0.80 L of SAE 10W-40 JASO MB oil, short urban commutes rarely burn off condensation fully—drain warm every 2,500–3,000 km and service the 100 ml rear gear oil.
Garage Wrenching Gotchas
- The Y-Connect Bluetooth CCU module draws small parasitic current when parked; disconnect the negative terminal or connect a maintainer during multi-week winter storage.
- Equipped with a non-ABS front disc and mechanical rear drum brake, keep rear brake lever free-play adjusted within 10–20 mm for progressive wet-weather stopping.
5. Frequently Asked Questions (FAQ)
What are the engine oil and rear hub gear oil capacities for the Yamaha Fazzio 125 Hybrid scooter?
With an isolated dry CVT belt case, the engine requires 0.8 L drain-only or 0.8 L (0.85 US qt) with filter/screen (B65-E3411-00 (Oil Strainer Screen)) of SAE 10W-40 (JASO MB). Service the rear reduction hub separately (final drive 100 ml).
How do you accurately check the oil level on the Fazzio 125 Hybrid, and what are its service intervals?
Hold the bike upright on level ground 2–3 minutes after shutdown, wipe the dipstick, and rest it on the filler threads without screwing it in (threading it in reads artificially high and risks oil starvation). Torque the drain plug to 20 N·m with a new crush washer. Factory oil change intervals are every 4,000 km, with valve clearance inspection every 12,000 km.
What are the cold tire pressures, puncture repair type, seat height, and range of the Fazzio 125 Hybrid?
Fitted with 110/70-12 47L front and 110/70-12 47L rear tubeless rims (compatible with roadside plug kits), set cold tire pressures to 25 / 29 PSI (175/200 kPa) solo or 25 / 33 PSI loaded. Seat height is 750 mm (29.5 in) at 95 kg wet weight, delivering ~270 km per 5.1 L tank.