Suzuki SIXTEEN 125 (UX125) – CN Tire Pressure, Oil Type & Fluid Specs

Component Specification
Production Years 2008 – 2014
Engine Oil SAE 10W-40 (JASO MB preferred) – 1.1 L
Front Tire 100/80-16 M/C 50P
Rear Tire 120/80-16 M/C 60P
Spark Plug NGK CR8E (Gap: 0.7 – 0.8 mm)
Battery YTX7L-BS

Engineering Highlight: The 16-Inch Paradigm

The Suzuki SIXTEEN 125 (UX125) was engineered with a singular focus: stability. Unlike traditional scooters that utilize 10 or 12-inch wheels, the UX125 features 16-inch cast aluminum wheels. This design was Suzuki’s direct technical response to the ‘High-Wheel’ scooter dominance in the European market, offering gyroscopic stability and bump absorption comparable to a full-sized motorcycle while maintaining the step-through convenience of a city commuter.

Technical Review: Performance and Architecture

At the heart of the UX125 is a 124cc, single-cylinder, 4-stroke, liquid-cooled SOHC engine. The integration of electronic fuel injection (EFI) ensures consistent throttle response and optimized fuel economy across varying altitudes and temperatures. The chassis is a robust under-bone frame designed to minimize flex during high-speed cornering, a common weakness in smaller-wheeled competitors. The combined braking system (CBS) distributes force between the front and rear discs, enhancing safety for urban riders.

Maintenance Guide & Technical Specs

Lubrication System

The UX125 requires 1.1 liters of SAE 10W-40 engine oil. For optimal clutch and transmission performance in this specific CVT-driven unit, an oil meeting API SF/SG or SH/SJ standards is required, with JASO MB being the preferred friction classification for modern scooter efficiency.

Ignition and Electrical

Reliable starting depends on the YTX7L-BS battery. The ignition system utilizes an NGK CR8E spark plug. It is critical to maintain a gap of 0.7 – 0.8 mm to ensure efficient combustion and prevent fouling in stop-and-go traffic.

Tires and Chassis Pressure

The large-diameter wheels require precise pressure management to maintain the intended handling characteristics:

  • Front (100/80-16): 1.75 bar (25 psi)
  • Rear (120/80-16): 2.00 bar (29 psi) for solo riding; 2.25 bar (33 psi) when carrying a passenger.

Frequently Asked Questions (FAQ)

Q: How often should I check the spark plug gap?
A: It is recommended to inspect the NGK CR8E plug every 4,000 km and ensure the gap remains within the 0.7-0.8 mm range.

Q: Can I use JASO MA oil?
A: While JASO MA (designed for wet clutches) won’t damage the engine, JASO MB is optimized for the low-friction requirements of scooter engines and typically provides better fuel economy.

Leave a Comment