Aprilia Tuono V4 1100 / Tuono V4 Factory — OEM Fluid, Tire Pressure & Maintenance Specs
1,077cc Liquid-Cooled 65° V4 DOHC 16-Valve · Source: Aprilia Tuono V4 1100 / Tuono V4 Factory (2017–Present) Official Owner’s Manual Maintenance Specifications
According to the Aprilia Tuono V4 1100 / Tuono V4 Factory (2017–Present) Official Owner’s Manual Maintenance Specifications, the 2017–Present Aprilia Tuono V4 1100 / Tuono V4 Factory (chassis ZD4KG000/ZD4KZA00) requires 3.7 L (3.91 US qt) of SAE 10W-50 (JASO MA2, API SN Full Synthetic 10W-50) engine oil for a drain-only change and 4 L (4.23 US qt) with filter service (1A023538 / 857187 (HF565)). Standard solo cold tire pressure is 230 kPa / 2.30 bar / 33 PSI front (120/70 ZR17 (58W)) and 250 kPa / 2.50 bar / 36 PSI rear (200/55 ZR17 (78W)), paired with 4× NGK CR9EKB / MR9DI-7 spark plug(s) and a YTZ10S battery.
Drain only: 3.7 L (3.91 US qt)
R 250 kPa (2.50 bar)
Est. Range: ~265 km (165 mi)
1. Engine Lubrication, Filter & Clutch Specifications
| Clutch Architecture | Wet Multi-Plate Manual Clutch NEVER use JASO MB |
|---|---|
| Recommended Viscosity & Grade | SAE 10W-50 (Alt: SAE 5W-40 (2017–2020)) · JASO MA2 · API SN Full Synthetic 10W-50 |
| Oil Volume (Drain / With Filter / Overhaul) |
• Drain only: 3.7 L (3.91 US qt) • With filter/strainer: 4 L (4.23 US qt) • Complete dry overhaul: 4.3 L (4.54 US qt) |
| OEM Oil Filter Code & Type | 1A023538 / 857187 (HF565) |
| Correct Oil Level Check Method | Hold bike upright on level ground 3–5 min after warm shutdown; read crankcase sight glass |
| Oil Drain Bolt Torque | 30 N·m (22.1 lb-ft / 3.06 kgf·m) — Use fresh crush washer |
2. Cold Tire Pressures, Wheels, Ignition & Drivetrain
| Front / Rear OEM Tire Sizes | Front: 120/70 ZR17 (58W) · Rear: 200/55 ZR17 (78W) (Tubeless) |
|---|---|
| Cold Tire Pressure — Solo Riding |
Front: 230 kPa / 2.30 bar / 33 PSI Rear: 250 kPa / 2.50 bar / 36 PSI |
| Cold Tire Pressure — 2-Up / Loaded Touring |
Front: 250 kPa / 2.50 bar / 36 PSI Rear: 280 kPa / 2.80 bar / 41 PSI |
| OEM Spark Plug & Quantity | NGK CR9EKB / MR9DI-7 × 4 (Gap: 0.7–0.8 mm) |
| OEM Battery Code & Rating | YTZ10S (12V 8.6Ah MF AGM) |
| Final Drive Maintenance | 525 Heavy-Duty X-Ring Chain — Maintain 25–35 mm slack and lubricate regularly |
| Brake Fluid & Coolant | DOT 4 · OAT ethylene-glycol coolant for aluminum radiators (50:50 premix) |
3. Ergonomics, Range & Scheduled Service Intervals
| Displacement · Max Power · Peak Torque | 1077 cc · 175 hp @ 11,350 rpm · 121 N·m (89.2 lb-ft) @ 9,000 rpm |
|---|---|
| Seat Height & Wet Curb Weight | 837 mm (33.0 in) · 209 kg (461 lbs) |
| Fuel Tank & Est. Real-World Range | 17.9 L (4.7 US gal) · ~14.8 km/L → ~265 km (165 mi) |
| OEM Scheduled Maintenance Intervals |
• First Break-In: 1,000 km • Engine Oil / Filter: 10,000 km / 10,000 km • Air Filter / Spark Plug: 20,000 km / 20,000 km • Valve Clearance Check: 20,000 km |
4. Generation Cutoffs & Real-World Wrenching Gotchas
Model-Year & Chassis Generation Notes
Frame-mounted bikini-fairing hyper-naked splitting in 2021+ into the sport-touring base Tuono V4 (taller screen, grab rails) and the track-honed Ohlins Smart EC 2.0 Tuono V4 Factory.
Oil & Clutch Mechanical Engineering Note
Because the 1,077cc 65° V4 runs hot in slow traffic, full-synthetic SAE 10W-50 JASO MA2 (4.0 L w/ filter 857187) keeps hot oil pressure rock-solid and eases neutral selection at stops.
Garage Wrenching Gotchas
- Oil weeping from the tiny cylinder-head weep holes usually traces to hardened spark-plug well seals under the valve covers rather than a blown head gasket.
- Front tire stone strikes easily puncture both the wide water radiator and lower oil cooler—install protective mesh guards early and flush OAT coolant every 2 years.
5. Frequently Asked Questions (FAQ)
What oil volume, JASO grade, and oil filter code does the Aprilia Tuono V4 1100 / Tuono V4 Factory (2017–Present) require?
Because its wet multi-plate clutch shares engine oil with the gearbox, run SAE 10W-50 (JASO MA2) at 3.7 L (3.91 US qt) drain-only and 4 L (4.23 US qt) with filter (1A023538 / 857187 (HF565)).
How do you accurately check the oil level on the Tuono V4 1100 / Tuono V4 Factory, and what are its service intervals?
Hold the motorcycle dead-vertical on level ground 2–3 minutes after warm shutdown and verify the oil sits mid-way between the Upper and Lower marks in the crankcase sight glass—never on the sidestand. Torque the drain plug to 30 N·m with a new crush washer. Factory oil change intervals are every 10,000 km, with valve clearance inspection every 20,000 km.
What are the cold tire pressures, puncture repair type, seat height, and range of the Tuono V4 1100 / Tuono V4 Factory?
Fitted with 120/70 ZR17 (58W) front and 200/55 ZR17 (78W) rear tubeless rims (compatible with roadside plug kits), set cold tire pressures to 33 / 36 PSI (230/250 kPa) solo or 36 / 41 PSI loaded. Seat height is 837 mm (33.0 in) at 209 kg wet weight, delivering ~265 km per 17.9 L tank.