Ducati XDiavel / XDiavel S (1262 DVT) — OEM Fluid, Tire Pressure & Maintenance Specs
1,262cc Liquid-Cooled 90° L-Twin Testastretta DVT (Forward Controls & Belt Final Drive) · Source: Ducati XDiavel / XDiavel S (1262 DVT) (2016–2024) Official Owner’s Manual Maintenance Specifications
According to the Ducati XDiavel / XDiavel S (1262 DVT) (2016–2024) Official Owner’s Manual Maintenance Specifications, the 2016–2024 Ducati XDiavel / XDiavel S (1262 DVT) (chassis GA/GB/GD) requires 3.3 L (3.49 US qt) of SAE 15W-50 (JASO MA2, API SM / Shell Advance Ducati 15W-50) engine oil for a drain-only change and 3.6 L (3.80 US qt) with filter service (44440291C / HF159). Standard solo cold tire pressure is 250 kPa / 2.50 bar / 36 PSI front (120/70 ZR17 M/C (58W)) and 250 kPa / 2.50 bar / 36 PSI rear (240/45 ZR17 M/C (82W)), paired with 4× NGK MAR9A-J spark plug(s) and a YT12B-BS battery.
Drain only: 3.3 L (3.49 US qt)
R 250 kPa (2.50 bar)
Est. Range: ~315 km (196 mi)
1. Engine Lubrication, Filter & Clutch Specifications
| Clutch Architecture | Wet Multi-Plate Manual Clutch NEVER use JASO MB |
|---|---|
| Recommended Viscosity & Grade | SAE 15W-50 · JASO MA2 · API SM / Shell Advance Ducati 15W-50 |
| Oil Volume (Drain / With Filter / Overhaul) |
• Drain only: 3.3 L (3.49 US qt) • With filter/strainer: 3.6 L (3.80 US qt) • Complete dry overhaul: 4.1 L (4.33 US qt) |
| OEM Oil Filter Code & Type | 44440291C / HF159 |
| Correct Oil Level Check Method | Hold bike upright on level ground 3–5 min after warm shutdown; read crankcase sight glass |
| Oil Drain Bolt Torque | 20 N·m (14.8 lb-ft / 2.04 kgf·m) — Use fresh crush washer |
2. Cold Tire Pressures, Wheels, Ignition & Drivetrain
| Front / Rear OEM Tire Sizes | Front: 120/70 ZR17 M/C (58W) · Rear: 240/45 ZR17 M/C (82W) (Tubeless) |
|---|---|
| Cold Tire Pressure — Solo Riding |
Front: 250 kPa / 2.50 bar / 36 PSI Rear: 250 kPa / 2.50 bar / 36 PSI |
| Cold Tire Pressure — 2-Up / Loaded Touring |
Front: 250 kPa / 2.50 bar / 36 PSI Rear: 290 kPa / 2.90 bar / 42 PSI |
| OEM Spark Plug & Quantity | NGK MAR9A-J × 4 (Gap: 0.8 mm) |
| OEM Battery Code & Rating | YT12B-BS (12V 10.0Ah Slim MF AGM) |
| Final Drive Maintenance | Carbon-Reinforced Toothed Final Belt — Verify sonic frequency tension and inspect pulley stones |
| Brake Fluid & Coolant | DOT 4 · OAT ethylene-glycol coolant for aluminum radiators (50:50 premix) |
3. Ergonomics, Range & Scheduled Service Intervals
| Displacement · Max Power · Peak Torque | 1262 cc · 152 hp @ 9,500 rpm · 126 N·m (92.9 lb-ft) @ 5,000 rpm |
|---|---|
| Seat Height & Wet Curb Weight | 755 mm (29.7 in) · 247 kg (545 lbs) |
| Fuel Tank & Est. Real-World Range | 18 L (4.8 US gal) · ~17.5 km/L → ~315 km (196 mi) |
| OEM Scheduled Maintenance Intervals |
• First Break-In: 1,000 km • Engine Oil / Filter: 15,000 km / 15,000 km • Air Filter / Spark Plug: 30,000 km / 30,000 km • Valve Clearance Check: 30,000 km |
4. Generation Cutoffs & Real-World Wrenching Gotchas
Model-Year & Chassis Generation Notes
Ducati’s first feet-forward belt-driven cruiser, relocating the water pump inside the L-twin V-valley for clean left-side engine aesthetics.
Oil & Clutch Mechanical Engineering Note
Low-RPM high-torque DVT cam phasers require clean SAE 15W-50 JASO MA2 full-synthetic oil (3.6 L w/ HF159 paper cartridge) to prevent phaser rattle.
Garage Wrenching Gotchas
- Road gravel trapped in the toothed final drive belt can snap belt cords—inspect belt teeth and lower stone guards regularly.
- Because the water pump sits tucked inside the V-valley, inspect the valley drain passage for dried pink coolant crust during oil services.
5. Frequently Asked Questions (FAQ)
What oil volume, JASO grade, and oil filter code does the Ducati XDiavel / XDiavel S (1262 DVT) (2016–2024) require?
Because its wet multi-plate clutch shares engine oil with the gearbox, run SAE 15W-50 (JASO MA2) at 3.3 L (3.49 US qt) drain-only and 3.6 L (3.80 US qt) with filter (44440291C / HF159).
How do you accurately check the oil level on the XDiavel / XDiavel S (1262 DVT), and what are its service intervals?
Hold the motorcycle dead-vertical on level ground 2–3 minutes after warm shutdown and verify the oil sits mid-way between the Upper and Lower marks in the crankcase sight glass—never on the sidestand. Torque the drain plug to 20 N·m with a new crush washer. Factory oil change intervals are every 15,000 km, with valve clearance inspection every 30,000 km.
What are the cold tire pressures, puncture repair type, seat height, and range of the XDiavel / XDiavel S (1262 DVT)?
Fitted with 120/70 ZR17 M/C (58W) front and 240/45 ZR17 M/C (82W) rear tubeless rims (compatible with roadside plug kits), set cold tire pressures to 36 / 36 PSI (250/250 kPa) solo or 36 / 42 PSI loaded. Seat height is 755 mm (29.7 in) at 247 kg wet weight, delivering ~315 km per 18 L tank.