Harley-Davidson Breakout 114 (FXBRS Softail) — OEM Fluid, Tire Pressure & Maintenance Specs
1,868cc Air/Oil-Cooled Dual-Counterbalanced 45° V-Twin Milwaukee-Eight 114 · Source: Harley-Davidson Breakout 114 (FXBRS Softail) (2018–2022) Official Owner’s Manual Maintenance Specifications
According to the Harley-Davidson Breakout 114 (FXBRS Softail) (2018–2022) Official Owner’s Manual Maintenance Specifications, the 2018–2022 Harley-Davidson Breakout 114 (FXBRS Softail) (chassis FXBRS) requires 4.3 L (4.54 US qt) of SAE 20W-50 (JASO MA2, Screamin’ Eagle SYN3 20W-50 / H-D 360 20W-50) engine oil for a drain-only change and 4.7 L (4.97 US qt) with filter service (HD 62700296 / 62700297 (HF171C)). Standard solo cold tire pressure is 250 kPa / 2.50 bar / 36 PSI front (130/60B21 63H) and 290 kPa / 2.90 bar / 42 PSI rear (240/40R18 79V), paired with 4× HD 6R10 (31600012 Dual-Plug M8) spark plug(s) and a YTX20HL-BS / HD 65989-97E battery.
Drain only: 4.3 L (4.54 US qt)
R 290 kPa (2.90 bar)
Est. Range: ~240 km (149 mi)
1. Engine Lubrication, Filter & Clutch Specifications
| Clutch Architecture | Wet Multi-Plate Manual Clutch NEVER use JASO MB |
|---|---|
| Recommended Viscosity & Grade | SAE 20W-50 · JASO MA2 · Screamin’ Eagle SYN3 20W-50 / H-D 360 20W-50 |
| Oil Volume (Drain / With Filter / Overhaul) |
• Drain only: 4.3 L (4.54 US qt) • With filter/strainer: 4.7 L (4.97 US qt) • Complete dry overhaul: 5.2 L (5.49 US qt) |
| OEM Oil Filter Code & Type | HD 62700296 / 62700297 (HF171C) |
| Correct Oil Level Check Method | At full operating temperature resting ON THE SIDESTAND (Jiffy Stand); thread dipstick in to read |
| Oil Drain Bolt Torque | 24 N·m (17.7 lb-ft / 2.45 kgf·m) — Use fresh crush washer |
| Primary Chaincase Fluid | 1065 ml (1.06 L) — H-D Formula+ Primary & Clutch Fluid (900–1,065 ml wet refill) |
| Separate Transmission / Gearbox Oil | 828 ml (0.83 L) — H-D Formula+ or Heavy Synthetic Gear Oil 80W-140 (828 ml / 28 oz) |
2. Cold Tire Pressures, Wheels, Ignition & Drivetrain
| Front / Rear OEM Tire Sizes | Front: 130/60B21 63H · Rear: 240/40R18 79V (Tubeless) |
|---|---|
| Cold Tire Pressure — Solo Riding |
Front: 250 kPa / 2.50 bar / 36 PSI Rear: 290 kPa / 2.90 bar / 42 PSI |
| Cold Tire Pressure — 2-Up / Loaded Touring |
Front: 250 kPa / 2.50 bar / 36 PSI Rear: 290 kPa / 2.90 bar / 42 PSI |
| OEM Spark Plug & Quantity | HD 6R10 (31600012 Dual-Plug M8) × 4 (Gap: 0.8–0.9 mm) |
| OEM Battery Code & Rating | YTX20HL-BS / HD 65989-97E (12V 18.0Ah Heavy-Duty AGM) |
| Final Drive Maintenance | Carbon/Aramid Reinforced Secondary Belt — Inspect belt deflection and pulley debris |
| Brake Fluid & Coolant | DOT 4 · Air/Oil-Cooled Engine (No liquid coolant) |
3. Ergonomics, Range & Scheduled Service Intervals
| Displacement · Max Power · Peak Torque | 1868 cc · 94 hp @ 5,020 rpm · 155 N·m (114.3 lb-ft) @ 3,000 rpm |
|---|---|
| Seat Height & Wet Curb Weight | 665 mm (26.2 in) · 305 kg (672 lbs) |
| Fuel Tank & Est. Real-World Range | 13.2 L (3.5 US gal) · ~18.2 km/L → ~240 km (149 mi) |
| OEM Scheduled Maintenance Intervals |
• First Break-In: 1,600 km • Engine Oil / Filter: 8,000 km / 8,000 km • Air Filter / Spark Plug: 24,000 km / 48,000 km • Valve Clearance Check: 48,000 km |
4. Generation Cutoffs & Real-World Wrenching Gotchas
Model-Year & Chassis Generation Notes
Built for 2018–2022, the FXBRS 114 pairs a 34-degree raked 21-inch front end and 240 mm rear tire with a compact 13.2 L tank and Gasser II wheels, preceding the 18.9 L-tank 2023 Breakout 117.
Oil & Clutch Mechanical Engineering Note
Sitting low in the raked Softail frame, the M8 114 uses standard 3-Hole separation (4.7 L SAE 20W-50 engine, 1,065 ml primary, 828 ml gearbox) checked hot on the sidestand.
Garage Wrenching Gotchas
- With lean angles limited to 26.8 degrees and frequent aftermarket air-ride lowering kits, always inspect sump drain-plug scrapes and re-verify belt tension at ride height.
- Because the 2018–2022 FXBRS carries the smaller 13.2 L fuel tank, plan highway fuel stops around 190–210 km using the digital riser-clamp display.
5. Frequently Asked Questions (FAQ)
How are engine and separate drivetrain fluid capacities split on the Harley-Davidson Breakout 114 (FXBRS Softail)?
The engine sump takes 4.3 L drain-only and 4.7 L (4.97 US qt) with filter (HD 62700296 / 62700297 (HF171C)) of SAE 20W-50 (JASO MA2), while isolated drivetrain cavities (primary chaincase 1065 ml, separate gearbox 828 ml) require dedicated gear/chaincase fluid.
How do you accurately check the oil level on the Breakout 114 (FXBRS Softail), and what are its service intervals?
Bring the engine to full operating temperature and check the Full Hot mark with the motorcycle resting on its sidestand (Jiffy Stand) on level pavement—measuring upright leads to crankcase overfill and breather blow-by. Torque the drain plug to 24 N·m with a new crush washer. Factory oil change intervals are every 8,000 km, with valve clearance inspection every 48,000 km.
What are the cold tire pressures, puncture repair type, seat height, and range of the Breakout 114 (FXBRS Softail)?
Fitted with 130/60B21 63H front and 240/40R18 79V rear tubeless rims (compatible with roadside plug kits), set cold tire pressures to 36 / 42 PSI (250/290 kPa) solo or 36 / 42 PSI loaded. Seat height is 665 mm (26.2 in) at 305 kg wet weight, delivering ~240 km per 13.2 L tank.