Honda CBR500R (PC62 / PC70) — OEM Fluid, Tire Pressure & Maintenance Specs
471cc Liquid-Cooled Parallel-Twin DOHC 8V (Assist/Slipper Clutch) · Source: Honda CBR500R (PC62 / PC70) (2019–Present) Official Owner’s Manual Maintenance Specifications
According to the Honda CBR500R (PC62 / PC70) (2019–Present) Official Owner’s Manual Maintenance Specifications, the 2019–Present Honda CBR500R (PC62 / PC70) (chassis PC62/PC70) requires 2.5 L (2.64 US qt) of SAE 10W-30 (JASO MA, API SJ or higher) engine oil for a drain-only change and 2.7 L (2.85 US qt) with filter service (15410-MCJ-000 / HF204). Standard solo cold tire pressure is 250 kPa / 2.50 bar / 36 PSI front (120/70ZR17 M/C (58W)) and 290 kPa / 2.90 bar / 42 PSI rear (160/60ZR17 M/C (69W)), paired with 2× NGK CPR8EA-9 spark plug(s) and a YTZ8V / YTZ10S battery.
Drain only: 2.5 L (2.64 US qt)
R 290 kPa (2.90 bar)
Est. Range: ~489 km (304 mi)
1. Engine Lubrication, Filter & Clutch Specifications
| Clutch Architecture | Wet Multi-Plate Manual Clutch NEVER use JASO MB |
|---|---|
| Recommended Viscosity & Grade | SAE 10W-30 (Alt: SAE 10W-40) · JASO MA · API SJ or higher |
| Oil Volume (Drain / With Filter / Overhaul) |
• Drain only: 2.5 L (2.64 US qt) • With filter/strainer: 2.7 L (2.85 US qt) • Complete dry overhaul: 3.2 L (3.38 US qt) |
| OEM Oil Filter Code & Type | 15410-MCJ-000 / HF204 |
| Correct Oil Level Check Method | Hold bike upright on level ground 3–5 min after warm shutdown; read crankcase sight glass |
| Oil Drain Bolt Torque | 30 N·m (22.1 lb-ft / 3.06 kgf·m) — Use fresh crush washer |
2. Cold Tire Pressures, Wheels, Ignition & Drivetrain
| Front / Rear OEM Tire Sizes | Front: 120/70ZR17 M/C (58W) · Rear: 160/60ZR17 M/C (69W) (Tubeless) |
|---|---|
| Cold Tire Pressure — Solo Riding |
Front: 250 kPa / 2.50 bar / 36 PSI Rear: 290 kPa / 2.90 bar / 42 PSI |
| Cold Tire Pressure — 2-Up / Loaded Touring |
Front: 250 kPa / 2.50 bar / 36 PSI Rear: 290 kPa / 2.90 bar / 42 PSI |
| OEM Spark Plug & Quantity | NGK CPR8EA-9 × 2 (Gap: 0.8–0.9 mm) |
| OEM Battery Code & Rating | YTZ8V / YTZ10S (12V 7.0–8.6Ah MF AGM) |
| Final Drive Maintenance | 520 Sealed O/X-Ring Chain — Maintain 25–35 mm slack and lube every 800–1,000 km |
| Brake Fluid & Coolant | DOT 4 · Silicate-free ethylene-glycol OAT coolant for aluminum radiators (50:50 premix) |
3. Ergonomics, Range & Scheduled Service Intervals
| Displacement · Max Power · Peak Torque | 471 cc · 47.6 hp @ 8,600 rpm · 43 N·m (31.7 lb-ft) @ 6,500 rpm |
|---|---|
| Seat Height & Wet Curb Weight | 785 mm (30.9 in) · 191 kg (421 lbs) |
| Fuel Tank & Est. Real-World Range | 17.1 L (4.5 US gal) · ~28.6 km/L → ~489 km (304 mi) |
| OEM Scheduled Maintenance Intervals |
• First Break-In: 1,000 km • Engine Oil / Filter: 12,000 km / 24,000 km • Air Filter / Spark Plug: 18,000 km / 24,000 km • Valve Clearance Check: 24,000 km |
4. Generation Cutoffs & Real-World Wrenching Gotchas
Model-Year & Chassis Generation Notes
PC62 (2019) lowered clip-ons below the top yoke and gained dual radial discs + USD forks in 2022; 2024+ PC70 added Fireblade-inspired hidden winglets, HSTC, and a 5-inch TFT.
Oil & Clutch Mechanical Engineering Note
Full bodywork traps more heat during summer canyon or trackday sessions, where stepping up from SAE 10W-30 to full-synthetic SAE 10W-40 JASO MA2 maintains strong hot oil pressure.
Garage Wrenching Gotchas
- While the HF204 oil filter clears the lower fairing cutout, topping up coolant cleanly requires pulling the right side panel—keep track of mixed Allen bolt shoulder heights.
- Accessing the two NGK CPR8EA-9 spark plugs requires lifting the 17.1 L fuel tank and airbox, so bundle plug replacement with air filter and valve checks.
5. Frequently Asked Questions (FAQ)
What oil volume, JASO grade, and oil filter code does the Honda CBR500R (PC62 / PC70) (2019–Present) require?
Because its wet multi-plate clutch shares engine oil with the gearbox, run SAE 10W-30 (JASO MA) at 2.5 L (2.64 US qt) drain-only and 2.7 L (2.85 US qt) with filter (15410-MCJ-000 / HF204).
How do you accurately check the oil level on the CBR500R (PC62 / PC70), and what are its service intervals?
Hold the motorcycle dead-vertical on level ground 2–3 minutes after warm shutdown and verify the oil sits mid-way between the Upper and Lower marks in the crankcase sight glass—never on the sidestand. Torque the drain plug to 30 N·m with a new crush washer. Factory oil change intervals are every 12,000 km, with valve clearance inspection every 24,000 km.
What are the cold tire pressures, puncture repair type, seat height, and range of the CBR500R (PC62 / PC70)?
Fitted with 120/70ZR17 M/C (58W) front and 160/60ZR17 M/C (69W) rear tubeless rims (compatible with roadside plug kits), set cold tire pressures to 36 / 42 PSI (250/290 kPa) solo or 36 / 42 PSI loaded. Seat height is 785 mm (30.9 in) at 191 kg wet weight, delivering ~489 km per 17.1 L tank.