Honda NX500 (PC72) — OEM Fluid, Tire Pressure & Maintenance Specs
471cc Liquid-Cooled Parallel-Twin DOHC 8V + HSTC Traction Control · Source: Honda NX500 (PC72) (2024–Present) Official Owner’s Manual Maintenance Specifications
According to the Honda NX500 (PC72) (2024–Present) Official Owner’s Manual Maintenance Specifications, the 2024–Present Honda NX500 (PC72) (chassis PC72) requires 2.5 L (2.64 US qt) of SAE 10W-30 (JASO MA, API SJ or higher) engine oil for a drain-only change and 2.7 L (2.85 US qt) with filter service (15410-MCJ-000 / HF204). Standard solo cold tire pressure is 250 kPa / 2.50 bar / 36 PSI front (110/80R19 M/C 59H) and 290 kPa / 2.90 bar / 42 PSI rear (160/60R17 M/C 69H), paired with 2× NGK CPR8EA-9 spark plug(s) and a YTZ8V / YTZ10S battery.
Drain only: 2.5 L (2.64 US qt)
R 290 kPa (2.90 bar)
Est. Range: ~487 km (303 mi)
1. Engine Lubrication, Filter & Clutch Specifications
| Clutch Architecture | Wet Multi-Plate Manual Clutch NEVER use JASO MB |
|---|---|
| Recommended Viscosity & Grade | SAE 10W-30 (Alt: SAE 10W-40) · JASO MA · API SJ or higher |
| Oil Volume (Drain / With Filter / Overhaul) |
• Drain only: 2.5 L (2.64 US qt) • With filter/strainer: 2.7 L (2.85 US qt) • Complete dry overhaul: 3.2 L (3.38 US qt) |
| OEM Oil Filter Code & Type | 15410-MCJ-000 / HF204 |
| Correct Oil Level Check Method | Hold bike upright on level ground 3–5 min after warm shutdown; read crankcase sight glass |
| Oil Drain Bolt Torque | 30 N·m (22.1 lb-ft / 3.06 kgf·m) — Use fresh crush washer |
2. Cold Tire Pressures, Wheels, Ignition & Drivetrain
| Front / Rear OEM Tire Sizes | Front: 110/80R19 M/C 59H · Rear: 160/60R17 M/C 69H (Tubeless) |
|---|---|
| Cold Tire Pressure — Solo Riding |
Front: 250 kPa / 2.50 bar / 36 PSI Rear: 290 kPa / 2.90 bar / 42 PSI |
| Cold Tire Pressure — 2-Up / Loaded Touring |
Front: 250 kPa / 2.50 bar / 36 PSI Rear: 290 kPa / 2.90 bar / 42 PSI |
| OEM Spark Plug & Quantity | NGK CPR8EA-9 × 2 (Gap: 0.8–0.9 mm) |
| OEM Battery Code & Rating | YTZ8V / YTZ10S (12V 7.0–8.6Ah MF AGM) |
| Final Drive Maintenance | 520 Sealed O/X-Ring Chain — Maintain 25–35 mm slack and lube every 800–1,000 km |
| Brake Fluid & Coolant | DOT 4 · Silicate-free ethylene-glycol OAT coolant for aluminum radiators (50:50 premix) |
3. Ergonomics, Range & Scheduled Service Intervals
| Displacement · Max Power · Peak Torque | 471 cc · 47.6 hp @ 8,600 rpm · 43 N·m (31.7 lb-ft) @ 6,500 rpm |
|---|---|
| Seat Height & Wet Curb Weight | 830 mm (32.7 in) · 196 kg (432 lbs) |
| Fuel Tank & Est. Real-World Range | 17.5 L (4.6 US gal) · ~27.8 km/L → ~487 km (303 mi) |
| OEM Scheduled Maintenance Intervals |
• First Break-In: 1,000 km • Engine Oil / Filter: 12,000 km / 24,000 km • Air Filter / Spark Plug: 18,000 km / 24,000 km • Valve Clearance Check: 24,000 km |
4. Generation Cutoffs & Real-World Wrenching Gotchas
Model-Year & Chassis Generation Notes
Introduced in 2024 to succeed the CB500X with 1.5 kg lighter 5-spoke wheels, rally-inspired fairing ergonomics, standard HSTC traction control, and a 5-inch RoadSync TFT display.
Oil & Clutch Mechanical Engineering Note
Retains the proven 471cc wet-sump crankcase and assist/slipper clutch taking 2.7 L of SAE 10W-30 JASO MA oil with spin-on filter HF204, verified upright via the right-side sight glass.
Garage Wrenching Gotchas
- Upper crash bars built for the 2019–2023 CB500X foul the wider NX500 side shrouds—verify PC72-specific fairing clearance before ordering protection.
- Switching HSTC off for loose gravel resets back to ON every time you cycle the ignition key, so re-disable traction control after trailside stops.
5. Frequently Asked Questions (FAQ)
What oil volume, JASO grade, and oil filter code does the Honda NX500 (PC72) (2024–Present) require?
Because its wet multi-plate clutch shares engine oil with the gearbox, run SAE 10W-30 (JASO MA) at 2.5 L (2.64 US qt) drain-only and 2.7 L (2.85 US qt) with filter (15410-MCJ-000 / HF204).
How do you accurately check the oil level on the NX500 (PC72), and what are its service intervals?
Hold the motorcycle dead-vertical on level ground 2–3 minutes after warm shutdown and verify the oil sits mid-way between the Upper and Lower marks in the crankcase sight glass—never on the sidestand. Torque the drain plug to 30 N·m with a new crush washer. Factory oil change intervals are every 12,000 km, with valve clearance inspection every 24,000 km.
What are the cold tire pressures, puncture repair type, seat height, and range of the NX500 (PC72)?
Fitted with 110/80R19 M/C 59H front and 160/60R17 M/C 69H rear tubeless rims (compatible with roadside plug kits), set cold tire pressures to 36 / 42 PSI (250/290 kPa) solo or 36 / 42 PSI loaded. Seat height is 830 mm (32.7 in) at 196 kg wet weight, delivering ~487 km per 17.5 L tank.