Honda CB500X (PC64) — OEM Fluid, Tire Pressure & Maintenance Specs
471cc Liquid-Cooled Parallel-Twin DOHC 8V 180° (Assist/Slipper Clutch) · Source: Honda CB500X (PC64) (2019–2023) Official Owner’s Manual Maintenance Specifications
According to the Honda CB500X (PC64) (2019–2023) Official Owner’s Manual Maintenance Specifications, the 2019–2023 Honda CB500X (PC64) (chassis PC64) requires 2.5 L (2.64 US qt) of SAE 10W-30 (JASO MA, API SJ or higher) engine oil for a drain-only change and 2.7 L (2.85 US qt) with filter service (15410-MCJ-000 / HF204). Standard solo cold tire pressure is 250 kPa / 2.50 bar / 36 PSI front (110/80R19 M/C 59H) and 290 kPa / 2.90 bar / 42 PSI rear (160/60R17 M/C 69H), paired with 2× NGK CPR8EA-9 spark plug(s) and a YTZ8V / YTZ10S battery.
Drain only: 2.5 L (2.64 US qt)
R 290 kPa (2.90 bar)
Est. Range: ~492 km (306 mi)
1. Engine Lubrication, Filter & Clutch Specifications
| Clutch Architecture | Wet Multi-Plate Manual Clutch NEVER use JASO MB |
|---|---|
| Recommended Viscosity & Grade | SAE 10W-30 (Alt: SAE 10W-40) · JASO MA · API SJ or higher |
| Oil Volume (Drain / With Filter / Overhaul) |
• Drain only: 2.5 L (2.64 US qt) • With filter/strainer: 2.7 L (2.85 US qt) • Complete dry overhaul: 3.2 L (3.38 US qt) |
| OEM Oil Filter Code & Type | 15410-MCJ-000 / HF204 |
| Correct Oil Level Check Method | Hold bike upright on level ground 3–5 min after warm shutdown; read crankcase sight glass |
| Oil Drain Bolt Torque | 30 N·m (22.1 lb-ft / 3.06 kgf·m) — Use fresh crush washer |
2. Cold Tire Pressures, Wheels, Ignition & Drivetrain
| Front / Rear OEM Tire Sizes | Front: 110/80R19 M/C 59H · Rear: 160/60R17 M/C 69H (Tubeless) |
|---|---|
| Cold Tire Pressure — Solo Riding |
Front: 250 kPa / 2.50 bar / 36 PSI Rear: 290 kPa / 2.90 bar / 42 PSI |
| Cold Tire Pressure — 2-Up / Loaded Touring |
Front: 250 kPa / 2.50 bar / 36 PSI Rear: 290 kPa / 2.90 bar / 42 PSI |
| OEM Spark Plug & Quantity | NGK CPR8EA-9 × 2 (Gap: 0.8–0.9 mm) |
| OEM Battery Code & Rating | YTZ8V / YTZ10S (12V 7.0–8.6Ah MF AGM) |
| Final Drive Maintenance | 520 Sealed O/X-Ring Chain — Maintain 25–35 mm slack and lube every 800–1,000 km |
| Brake Fluid & Coolant | DOT 4 · Silicate-free ethylene-glycol OAT coolant for aluminum radiators (50:50 premix) |
3. Ergonomics, Range & Scheduled Service Intervals
| Displacement · Max Power · Peak Torque | 471 cc · 47.6 hp @ 8,600 rpm · 43 N·m (31.7 lb-ft) @ 6,500 rpm |
|---|---|
| Seat Height & Wet Curb Weight | 830 mm (32.7 in) · 199 kg (439 lbs) |
| Fuel Tank & Est. Real-World Range | 17.7 L (4.7 US gal) · ~27.8 km/L → ~492 km (306 mi) |
| OEM Scheduled Maintenance Intervals |
• First Break-In: 1,000 km • Engine Oil / Filter: 12,000 km / 24,000 km • Air Filter / Spark Plug: 18,000 km / 24,000 km • Valve Clearance Check: 24,000 km |
4. Generation Cutoffs & Real-World Wrenching Gotchas
Model-Year & Chassis Generation Notes
Earlier 2013–2018 CB500X models wore a 17-inch front wheel; 2019 introduced the 19-inch front wheel and slipper clutch, and 2022–2023 added Showa SFF-BP USD forks and dual front discs before NX500 replaced it.
Oil & Clutch Mechanical Engineering Note
Uses spin-on filter HF204 and 2.7 L of SAE 10W-30 JASO MA oil; install an aluminum skid plate if riding gravel because the oil filter and cast pan sit directly behind the front wheel.
Garage Wrenching Gotchas
- Both the spin-on oil filter and cast aluminum sump sit exposed to front-wheel rock strikes—fit a frame-mounted skid plate before tackling unpaved trails.
- When bolting crash bars through the main engine hanger mounts, remove and torque only one side at a time while supporting the crankcase on a jack.
5. Frequently Asked Questions (FAQ)
What oil volume, JASO grade, and oil filter code does the Honda CB500X (PC64) (2019–2023) require?
Because its wet multi-plate clutch shares engine oil with the gearbox, run SAE 10W-30 (JASO MA) at 2.5 L (2.64 US qt) drain-only and 2.7 L (2.85 US qt) with filter (15410-MCJ-000 / HF204).
How do you accurately check the oil level on the CB500X (PC64), and what are its service intervals?
Hold the motorcycle dead-vertical on level ground 2–3 minutes after warm shutdown and verify the oil sits mid-way between the Upper and Lower marks in the crankcase sight glass—never on the sidestand. Torque the drain plug to 30 N·m with a new crush washer. Factory oil change intervals are every 12,000 km, with valve clearance inspection every 24,000 km.
What are the cold tire pressures, puncture repair type, seat height, and range of the CB500X (PC64)?
Fitted with 110/80R19 M/C 59H front and 160/60R17 M/C 69H rear tubeless rims (compatible with roadside plug kits), set cold tire pressures to 36 / 42 PSI (250/290 kPa) solo or 36 / 42 PSI loaded. Seat height is 830 mm (32.7 in) at 199 kg wet weight, delivering ~492 km per 17.7 L tank.