KTM 1290 Super Duke R EVO — OEM Fluid, Tire Pressure & Maintenance Specs
1,301cc Liquid-Cooled 75-deg V-Twin DOHC 8-Valve LC8 · Source: KTM 1290 Super Duke R EVO (2020–2023) Official Owner’s Manual Maintenance Specifications
According to the KTM 1290 Super Duke R EVO (2020–2023) Official Owner’s Manual Maintenance Specifications, the 2020–2023 KTM 1290 Super Duke R EVO (chassis VBKV3940/LC8-1301) requires 3.1 L (3.28 US qt) of SAE 10W-50 (JASO MA2, Motorex Power Synt 4T 10W-50 Full Synthetic) engine oil for a drain-only change and 3.5 L (3.70 US qt) with filter service (60038015000 / HF650). Standard solo cold tire pressure is 250 kPa / 2.50 bar / 36 PSI front (120/70 ZR17) and 250 kPa / 2.50 bar / 36 PSI rear (200/55 ZR17), paired with 4× NGK LKAR9BI-10 (x2) + LMAR7DI-10 (x2) spark plug(s) and a YTZ14S battery.
Drain only: 3.1 L (3.28 US qt)
R 250 kPa (2.50 bar)
Est. Range: ~285 km (177 mi)
1. Engine Lubrication, Filter & Clutch Specifications
| Clutch Architecture | Wet Multi-Plate Manual Clutch NEVER use JASO MB |
|---|---|
| Recommended Viscosity & Grade | SAE 10W-50 · JASO MA2 · Motorex Power Synt 4T 10W-50 Full Synthetic |
| Oil Volume (Drain / With Filter / Overhaul) |
• Drain only: 3.1 L (3.28 US qt) • With filter/strainer: 3.5 L (3.70 US qt) • Complete dry overhaul: 3.9 L (4.12 US qt) |
| OEM Oil Filter Code & Type | 60038015000 / HF650 |
| Correct Oil Level Check Method | Hold bike upright on level ground 3–5 min after warm shutdown; read crankcase sight glass |
| Oil Drain Bolt Torque | 20 N·m (14.8 lb-ft / 2.04 kgf·m) — Use fresh crush washer |
2. Cold Tire Pressures, Wheels, Ignition & Drivetrain
| Front / Rear OEM Tire Sizes | Front: 120/70 ZR17 · Rear: 200/55 ZR17 (Tubeless) |
|---|---|
| Cold Tire Pressure — Solo Riding |
Front: 250 kPa / 2.50 bar / 36 PSI Rear: 250 kPa / 2.50 bar / 36 PSI |
| Cold Tire Pressure — 2-Up / Loaded Touring |
Front: 250 kPa / 2.50 bar / 36 PSI Rear: 290 kPa / 2.90 bar / 42 PSI |
| OEM Spark Plug & Quantity | NGK LKAR9BI-10 (x2) + LMAR7DI-10 (x2) × 4 (Gap: 1.0 mm) |
| OEM Battery Code & Rating | YTZ14S (12V 8.6–11.2Ah MF AGM) |
| Final Drive Maintenance | 525 Heavy-Duty X-Ring Chain — Maintain 25–35 mm slack and lubricate regularly |
| Brake Fluid & Coolant | DOT 4 or DOT 5.1 · OAT ethylene-glycol coolant for aluminum radiators (50:50 premix) |
3. Ergonomics, Range & Scheduled Service Intervals
| Displacement · Max Power · Peak Torque | 1301 cc · 180 hp @ 9,500 rpm · 140 N·m (103.3 lb-ft) @ 8,000 rpm |
|---|---|
| Seat Height & Wet Curb Weight | 835 mm (32.9 in) · 212 kg (467 lbs) |
| Fuel Tank & Est. Real-World Range | 16 L (4.2 US gal) · ~17.8 km/L → ~285 km (177 mi) |
| OEM Scheduled Maintenance Intervals |
• First Break-In: 1,000 km • Engine Oil / Filter: 15,000 km / 15,000 km • Air Filter / Spark Plug: 15,000 km / 30,000 km • Valve Clearance Check: 30,000 km |
4. Generation Cutoffs & Real-World Wrenching Gotchas
Model-Year & Chassis Generation Notes
Gen 3 Beast frame debuted in 2020 using the 1,301cc LC8 V-twin as a stressed member, gaining 2nd-gen WP APEX Semi-Active Technology suspension on the 2022–2023 R EVO.
Oil & Clutch Mechanical Engineering Note
Pumping out 140 N·m, the 1,301cc LC8 V-twin circulates 3.5 L of Motorex Power Synt 10W-50 JASO MA2 through paper filter 60038015000 (HF650) and dual sump screens.
Garage Wrenching Gotchas
- Its single-sided swingarm rear axle nut torques to 250 N·m—pull the safety retaining clip first and use a dedicated 60 mm 3/4-inch socket with a long breaker bar.
- Dual-plug LC8 heads run four spark plugs total (two LKAR9BI-10 center plugs and two LMAR7DI-10 side plugs)—verify inner vs outer thread reach carefully.
5. Frequently Asked Questions (FAQ)
What oil volume, JASO grade, and oil filter code does the KTM 1290 Super Duke R EVO (2020–2023) require?
Because its wet multi-plate clutch shares engine oil with the gearbox, run SAE 10W-50 (JASO MA2) at 3.1 L (3.28 US qt) drain-only and 3.5 L (3.70 US qt) with filter (60038015000 / HF650).
How do you accurately check the oil level on the 1290 Super Duke R EVO, and what are its service intervals?
Hold the motorcycle dead-vertical on level ground 2–3 minutes after warm shutdown and verify the oil sits mid-way between the Upper and Lower marks in the crankcase sight glass—never on the sidestand. Torque the drain plug to 20 N·m with a new crush washer. Factory oil change intervals are every 15,000 km, with valve clearance inspection every 30,000 km.
What are the cold tire pressures, puncture repair type, seat height, and range of the 1290 Super Duke R EVO?
Fitted with 120/70 ZR17 front and 200/55 ZR17 rear tubeless rims (compatible with roadside plug kits), set cold tire pressures to 36 / 36 PSI (250/250 kPa) solo or 36 / 42 PSI loaded. Seat height is 835 mm (32.9 in) at 212 kg wet weight, delivering ~285 km per 16 L tank.