Moto Guzzi Stelvio (1042 Compact Block) — OEM Fluid, Tire Pressure & Maintenance Specs
1,042cc Liquid-Cooled Transverse 90° V-Twin DOHC 8-Valve with Optional PFF Radar · Source: Moto Guzzi Stelvio (1042 Compact Block) (2024–Present) Official Owner’s Manual Maintenance Specifications
According to the Moto Guzzi Stelvio (1042 Compact Block) (2024–Present) Official Owner’s Manual Maintenance Specifications, the 2024–Present Moto Guzzi Stelvio (1042 Compact Block) (chassis ZGUMHA00/MH1042) requires 4.5 L (4.76 US qt) of SAE 10W-50 (JASO MA2, API SN / JASO MA2 Full Synthetic) engine oil for a drain-only change and 4.9 L (5.18 US qt) with filter service (857187 / HF565). Standard solo cold tire pressure is 250 kPa / 2.50 bar / 36 PSI front (120/70 R19 60V) and 290 kPa / 2.90 bar / 42 PSI rear (170/60 R17 72V), paired with 2× NGK LMAR8EI-7 spark plug(s) and a YTZ14S / YTX14-BS battery.
Drain only: 4.5 L (4.76 US qt)
R 290 kPa (2.90 bar)
Est. Range: ~412 km (256 mi)
1. Engine Lubrication, Filter & Clutch Specifications
| Clutch Architecture | Wet Multi-Plate Manual Clutch NEVER use JASO MB |
|---|---|
| Recommended Viscosity & Grade | SAE 10W-50 · JASO MA2 · API SN / JASO MA2 Full Synthetic |
| Oil Volume (Drain / With Filter / Overhaul) |
• Drain only: 4.5 L (4.76 US qt) • With filter/strainer: 4.9 L (5.18 US qt) • Complete dry overhaul: 5.3 L (5.60 US qt) |
| OEM Oil Filter Code & Type | 857187 / HF565 |
| Correct Oil Level Check Method | Hold bike upright on level ground 3–5 min after warm shutdown; read crankcase sight glass |
| Oil Drain Bolt Torque | 25 N·m (18.4 lb-ft / 2.55 kgf·m) — Use fresh crush washer |
| Final Drive / Bevel Gear Oil | 200 ml (0.20 L) — SAE 75W-140 GL-5 (200 ml single-sided shaft bevel drive) |
2. Cold Tire Pressures, Wheels, Ignition & Drivetrain
| Front / Rear OEM Tire Sizes | Front: 120/70 R19 60V · Rear: 170/60 R17 72V (Tubeless) |
|---|---|
| Cold Tire Pressure — Solo Riding |
Front: 250 kPa / 2.50 bar / 36 PSI Rear: 290 kPa / 2.90 bar / 42 PSI |
| Cold Tire Pressure — 2-Up / Loaded Touring |
Front: 250 kPa / 2.50 bar / 36 PSI Rear: 290 kPa / 2.90 bar / 42 PSI |
| OEM Spark Plug & Quantity | NGK LMAR8EI-7 × 2 (Gap: 0.7 mm) |
| OEM Battery Code & Rating | YTZ14S / YTX14-BS (12V 12.0Ah MF AGM) |
| Final Drive Maintenance | Cardan Shaft Final Drive — Replace rear bevel-gear hypoid oil at exact measured volume |
| Brake Fluid & Coolant | DOT 4 · OAT ethylene-glycol coolant for aluminum radiators (50:50 premix) |
3. Ergonomics, Range & Scheduled Service Intervals
| Displacement · Max Power · Peak Torque | 1042 cc · 115 hp @ 8,700 rpm · 105 N·m (77.4 lb-ft) @ 6,750 rpm |
|---|---|
| Seat Height & Wet Curb Weight | 830 mm (32.7 in) · 246 kg (542 lbs) |
| Fuel Tank & Est. Real-World Range | 21 L (5.5 US gal) · ~19.6 km/L → ~412 km (256 mi) |
| OEM Scheduled Maintenance Intervals |
• First Break-In: 1,500 km • Engine Oil / Filter: 12,000 km / 12,000 km • Air Filter / Spark Plug: 24,000 km / 24,000 km • Valve Clearance Check: 24,000 km |
4. Generation Cutoffs & Real-World Wrenching Gotchas
Model-Year & Chassis Generation Notes
Reborn around the reinforced 1,042cc liquid-cooled Compact Block with 170 mm suspension travel, 19/17-inch tubeless cross-spoke wheels, electric screen, and Piaggio PFF 4D radar.
Oil & Clutch Mechanical Engineering Note
Engineered with a deep reinforced sump holding 4.9 L of SAE 10W-50 JASO MA2 oil (with filter 857187) for off-road thermal headroom plus 200 ml of 75W-140 shaft bevel fluid.
Garage Wrenching Gotchas
- On PFF Rider Assistance trims, heavy mud or bug splatter over the front/rear 4D radar domes triggers FCC/BLIS warnings—wipe sensor covers gently with water and microfiber.
- Maintenance-free on highway tours, the single-sided shaft drive still deserves bevel-housing inspection and fresh 200 ml 75W-140 gear oil after deep water crossings.
5. Frequently Asked Questions (FAQ)
What oil volume, JASO grade, and oil filter code does the Moto Guzzi Stelvio (1042 Compact Block) (2024–Present) require?
Because its wet multi-plate clutch shares engine oil with the gearbox, run SAE 10W-50 (JASO MA2) at 4.5 L (4.76 US qt) drain-only and 4.9 L (5.18 US qt) with filter (857187 / HF565). Also service final drive 200 ml.
How do you accurately check the oil level on the Stelvio (1042 Compact Block), and what are its service intervals?
Hold the motorcycle dead-vertical on level ground 2–3 minutes after warm shutdown and verify the oil sits mid-way between the Upper and Lower marks in the crankcase sight glass—never on the sidestand. Torque the drain plug to 25 N·m with a new crush washer. Factory oil change intervals are every 12,000 km, with valve clearance inspection every 24,000 km.
What are the cold tire pressures, puncture repair type, seat height, and range of the Stelvio (1042 Compact Block)?
Fitted with 120/70 R19 60V front and 170/60 R17 72V rear tubeless rims (compatible with roadside plug kits), set cold tire pressures to 36 / 42 PSI (250/290 kPa) solo or 36 / 42 PSI loaded. Seat height is 830 mm (32.7 in) at 246 kg wet weight, delivering ~412 km per 21 L tank.