Kawasaki Versys 1000 SE — OEM Fluid, Tire Pressure & Maintenance Specs
1,043cc Liquid-Cooled Inline-4 DOHC 16-Valve (Showa Skyhook KECS · Cornering Lights) · Source: Kawasaki Versys 1000 SE (2019–2024) Official Owner’s Manual Maintenance Specifications
According to the Kawasaki Versys 1000 SE (2019–2024) Official Owner’s Manual Maintenance Specifications, the 2019–2024 Kawasaki Versys 1000 SE (chassis KLZ1000C/KLZ1000D) requires 3.2 L (3.38 US qt) of SAE 10W-40 (JASO MA2, API SG/SJ/SL) engine oil for a drain-only change and 3.8 L (4.02 US qt) with filter service (16097-0008 / HF303). Standard solo cold tire pressure is 250 kPa / 2.50 bar / 36 PSI front (120/70 ZR17 M/C 58W) and 290 kPa / 2.90 bar / 42 PSI rear (180/55 ZR17 M/C 73W), paired with 4× NGK CR9EIA-9 / SILMAR9B9 spark plug(s) and a YTX9-BS / YTZ10S battery.
Drain only: 3.2 L (3.38 US qt)
R 290 kPa (2.90 bar)
Est. Range: ~382 km (237 mi)
1. Engine Lubrication, Filter & Clutch Specifications
| Clutch Architecture | Wet Multi-Plate Manual Clutch NEVER use JASO MB |
|---|---|
| Recommended Viscosity & Grade | SAE 10W-40 (Alt: SAE 10W-50) · JASO MA2 · API SG/SJ/SL |
| Oil Volume (Drain / With Filter / Overhaul) |
• Drain only: 3.2 L (3.38 US qt) • With filter/strainer: 3.8 L (4.02 US qt) • Complete dry overhaul: 4 L (4.23 US qt) |
| OEM Oil Filter Code & Type | 16097-0008 / HF303 |
| Correct Oil Level Check Method | Hold bike upright on level ground 3–5 min after warm shutdown; read crankcase sight glass |
| Oil Drain Bolt Torque | 29 N·m (21.4 lb-ft / 2.96 kgf·m) — Use fresh crush washer |
2. Cold Tire Pressures, Wheels, Ignition & Drivetrain
| Front / Rear OEM Tire Sizes | Front: 120/70 ZR17 M/C 58W · Rear: 180/55 ZR17 M/C 73W (Tubeless) |
|---|---|
| Cold Tire Pressure — Solo Riding |
Front: 250 kPa / 2.50 bar / 36 PSI Rear: 290 kPa / 2.90 bar / 42 PSI |
| Cold Tire Pressure — 2-Up / Loaded Touring |
Front: 250 kPa / 2.50 bar / 36 PSI Rear: 290 kPa / 2.90 bar / 42 PSI |
| OEM Spark Plug & Quantity | NGK CR9EIA-9 / SILMAR9B9 × 4 (Gap: 0.8–0.9 mm) |
| OEM Battery Code & Rating | YTX9-BS / YTZ10S (12V 8.0–8.6Ah MF AGM) |
| Final Drive Maintenance | 525 Heavy-Duty Sealed X-Ring Chain — Maintain 25–35 mm slack and clean/lube regularly |
| Brake Fluid & Coolant | DOT 4 · Silicate-free ethylene-glycol OAT coolant for aluminum radiators (50:50 premix) |
3. Ergonomics, Range & Scheduled Service Intervals
| Displacement · Max Power · Peak Torque | 1043 cc · 120 hp @ 9,000 rpm · 102 N·m (75.2 lb-ft) @ 7,500 rpm |
|---|---|
| Seat Height & Wet Curb Weight | 840 mm (33.1 in) · 257 kg (567 lbs) |
| Fuel Tank & Est. Real-World Range | 21 L (5.5 US gal) · ~18.2 km/L → ~382 km (237 mi) |
| OEM Scheduled Maintenance Intervals |
• First Break-In: 1,000 km • Engine Oil / Filter: 12,000 km / 12,000 km • Air Filter / Spark Plug: 18,000 km / 12,000 km • Valve Clearance Check: 24,000 km |
4. Generation Cutoffs & Real-World Wrenching Gotchas
Model-Year & Chassis Generation Notes
Overhauled in 2019 (KLZ1000D) with ride-by-wire, cruise control, and cornering LEDs, upgraded with Showa Skyhook KECS software in 2021, and succeeded by the 1,099cc Versys 1100 for 2025.
Oil & Clutch Mechanical Engineering Note
Silky 1,043cc four-cylinder smoothness relies on 3.8 L (with filter HF303) of clean SAE 10W-40 JASO MA2 synthetic oil to keep the bi-directional KQS quickshifter effortless.
Garage Wrenching Gotchas
- Unclip and protect the KECS damping solenoid leads at the fork bottoms and rear shock body before hoisting the wheels for tire changes.
- Label the cornering-lamp and fairing temp-sensor connectors before pulling the upper side cowls to lift the 21 L fuel tank for airbox access.
5. Frequently Asked Questions (FAQ)
What oil volume, JASO grade, and oil filter code does the Kawasaki Versys 1000 SE (2019–2024) require?
Because its wet multi-plate clutch shares engine oil with the gearbox, run SAE 10W-40 (JASO MA2) at 3.2 L (3.38 US qt) drain-only and 3.8 L (4.02 US qt) with filter (16097-0008 / HF303).
How do you accurately check the oil level on the Versys 1000 SE, and what are its service intervals?
Hold the motorcycle dead-vertical on level ground 2–3 minutes after warm shutdown and verify the oil sits mid-way between the Upper and Lower marks in the crankcase sight glass—never on the sidestand. Torque the drain plug to 29 N·m with a new crush washer. Factory oil change intervals are every 12,000 km, with valve clearance inspection every 24,000 km.
What are the cold tire pressures, puncture repair type, seat height, and range of the Versys 1000 SE?
Fitted with 120/70 ZR17 M/C 58W front and 180/55 ZR17 M/C 73W rear tubeless rims (compatible with roadside plug kits), set cold tire pressures to 36 / 42 PSI (250/290 kPa) solo or 36 / 42 PSI loaded. Seat height is 840 mm (33.1 in) at 257 kg wet weight, delivering ~382 km per 21 L tank.