Yamaha Grand Filano Hybrid 125 — OEM Fluid, Tire Pressure & Maintenance Specs
125cc Forced Air-Cooled Single SOHC 2-Valve Blue Core Hybrid Power Assist · Source: Yamaha Grand Filano Hybrid 125 (2018–Present) Official Owner’s Manual Maintenance Specifications
According to the Yamaha Grand Filano Hybrid 125 (2018–Present) Official Owner’s Manual Maintenance Specifications, the 2018–Present Yamaha Grand Filano Hybrid 125 (chassis B8B/BPB) requires 0.8 L (0.85 US qt) of SAE 10W-40 (JASO MB, API SG or higher) engine oil for a drain-only change and 0.8 L (0.85 US qt) with filter service (B65-E3411-00 (Oil Strainer Screen)). Standard solo cold tire pressure is 175 kPa / 1.75 bar / 25 PSI front (110/70-12 47L) and 200 kPa / 2.00 bar / 29 PSI rear (110/70-12 47L), paired with 1× NGK CR6HSA spark plug(s) and a YTZ7V battery.
Drain only: 0.8 L (0.85 US qt)
R 200 kPa (2.00 bar)
Est. Range: ~229 km (142 mi)
1. Engine Lubrication, Filter & Clutch Specifications
| Clutch Architecture | Dry Centrifugal CVT Belt Drive |
|---|---|
| Recommended Viscosity & Grade | SAE 10W-40 (Alt: SAE 10W-30) · JASO MB · API SG or higher |
| Oil Volume (Drain / With Filter / Overhaul) |
• Drain only: 0.8 L (0.85 US qt) • With filter/strainer: 0.8 L (0.85 US qt) • Complete dry overhaul: 0.84 L (0.89 US qt) |
| OEM Oil Filter Code & Type | B65-E3411-00 (Oil Strainer Screen) |
| Correct Oil Level Check Method | Hold upright on level ground; rest dipstick UNTHREADED on filler neck (do NOT screw in) |
| Oil Drain Bolt Torque | 20 N·m (14.8 lb-ft / 2.04 kgf·m) — Use fresh crush washer |
| Final Drive / Bevel Gear Oil | 100 ml (0.10 L) — SAE 10W-40 JASO MB (100 ml rear gear oil) |
2. Cold Tire Pressures, Wheels, Ignition & Drivetrain
| Front / Rear OEM Tire Sizes | Front: 110/70-12 47L · Rear: 110/70-12 47L (Tubeless) |
|---|---|
| Cold Tire Pressure — Solo Riding |
Front: 175 kPa / 1.75 bar / 25 PSI Rear: 200 kPa / 2.00 bar / 29 PSI |
| Cold Tire Pressure — 2-Up / Loaded Touring |
Front: 175 kPa / 1.75 bar / 25 PSI Rear: 225 kPa / 2.25 bar / 33 PSI |
| OEM Spark Plug & Quantity | NGK CR6HSA × 1 (Gap: 0.8–0.9 mm) |
| OEM Battery Code & Rating | YTZ7V (12V 6.0Ah MF AGM (Stop & Start)) |
| Final Drive Maintenance | Dry V-Belt CVT Drive — Inspect/replace V-belt and rollers every 20,000–24,000 km |
| Brake Fluid & Coolant | DOT 4 · Forced Air-Cooled Engine (No liquid coolant) |
3. Ergonomics, Range & Scheduled Service Intervals
| Displacement · Max Power · Peak Torque | 125 cc · 8.2 hp @ 6,500 rpm · 10.4 N·m (7.7 lb-ft) @ 5,000 rpm |
|---|---|
| Seat Height & Wet Curb Weight | 790 mm (31.1 in) · 102 kg (225 lbs) |
| Fuel Tank & Est. Real-World Range | 4.4 L (1.2 US gal) · ~52 km/L → ~229 km (142 mi) |
| OEM Scheduled Maintenance Intervals |
• First Break-In: 1,000 km • Engine Oil / Filter: 4,000 km / 8,000 km • Air Filter / Spark Plug: 12,000 km / 8,000 km • Valve Clearance Check: 12,000 km |
4. Generation Cutoffs & Real-World Wrenching Gotchas
Model-Year & Chassis Generation Notes
Introduced in 2018 (B8B) with SMG 3-second launch power assist, the Grand Filano Hybrid received updated styling and a color TFT sub-display on 2023+ Connected (BPB) models.
Oil & Clutch Mechanical Engineering Note
Unlike 0.9 L liquid-cooled VVA scooters, this air-cooled 2-valve Blue Core engine holds exactly 0.80 L on a drain-and-fill (SAE 10W-40 JASO MB) plus 100 ml of gear oil.
Garage Wrenching Gotchas
- Both Stop & Start idling stop and the 3-second SMG hybrid assist disable automatically if the 12V YTZ7V AGM battery state-of-charge drops—keep it on a tender if ridden short hops.
- Because the 4.4 L fuel tank sits beneath the flat floorboard to free up 27 L of underseat storage, avoid dropping abruptly off high curbs that could scrape the belly pan.
5. Frequently Asked Questions (FAQ)
What are the engine oil and rear hub gear oil capacities for the Yamaha Grand Filano Hybrid 125 scooter?
With an isolated dry CVT belt case, the engine requires 0.8 L drain-only or 0.8 L (0.85 US qt) with filter/screen (B65-E3411-00 (Oil Strainer Screen)) of SAE 10W-40 (JASO MB). Service the rear reduction hub separately (final drive 100 ml).
How do you accurately check the oil level on the Grand Filano Hybrid 125, and what are its service intervals?
Hold the bike upright on level ground 2–3 minutes after shutdown, wipe the dipstick, and rest it on the filler threads without screwing it in (threading it in reads artificially high and risks oil starvation). Torque the drain plug to 20 N·m with a new crush washer. Factory oil change intervals are every 4,000 km, with valve clearance inspection every 12,000 km.
What are the cold tire pressures, puncture repair type, seat height, and range of the Grand Filano Hybrid 125?
Fitted with 110/70-12 47L front and 110/70-12 47L rear tubeless rims (compatible with roadside plug kits), set cold tire pressures to 25 / 29 PSI (175/200 kPa) solo or 25 / 33 PSI loaded. Seat height is 790 mm (31.1 in) at 102 kg wet weight, delivering ~229 km per 4.4 L tank.