Suzuki Burgman 200 — OEM Fluid, Tire Pressure & Maintenance Specs
200cc Liquid-Cooled Single SOHC 4-Valve (735mm Low Seat · 41L Underseat Trunk) · Source: Suzuki Burgman 200 (2014–2023) Official Owner’s Manual Maintenance Specifications
According to the Suzuki Burgman 200 (2014–2023) Official Owner’s Manual Maintenance Specifications, the 2014–2023 Suzuki Burgman 200 (chassis CH41A/UH200A) requires 1.2 L (1.27 US qt) of SAE 10W-40 (JASO MB, API SJ/SL) engine oil for a drain-only change and 1.3 L (1.37 US qt) with filter service (16510-05240 / HF132). Standard solo cold tire pressure is 175 kPa / 1.75 bar / 25 PSI front (110/90-13 M/C 56P) and 200 kPa / 2.00 bar / 29 PSI rear (130/70-12 56P), paired with 1× NGK CR7E / MR8E-9 spark plug(s) and a FTZ9-BS / YTX12-BS battery.
Drain only: 1.2 L (1.27 US qt)
R 200 kPa (2.00 bar)
Est. Range: ~320 km (199 mi)
1. Engine Lubrication, Filter & Clutch Specifications
| Clutch Architecture | Dry Centrifugal CVT Belt Drive |
|---|---|
| Recommended Viscosity & Grade | SAE 10W-40 · JASO MB · API SJ/SL |
| Oil Volume (Drain / With Filter / Overhaul) |
• Drain only: 1.2 L (1.27 US qt) • With filter/strainer: 1.3 L (1.37 US qt) • Complete dry overhaul: 1.5 L (1.59 US qt) |
| OEM Oil Filter Code & Type | 16510-05240 / HF132 |
| Correct Oil Level Check Method | Hold bike upright on level ground 3–5 min after warm shutdown; read crankcase sight glass |
| Oil Drain Bolt Torque | 23 N·m (17.0 lb-ft / 2.35 kgf·m) — Use fresh crush washer |
| Final Drive / Bevel Gear Oil | 190 ml (0.19 L) — SAE 10W-40 / Hypoid 80W-90 (190 ml final reduction oil) |
2. Cold Tire Pressures, Wheels, Ignition & Drivetrain
| Front / Rear OEM Tire Sizes | Front: 110/90-13 M/C 56P · Rear: 130/70-12 56P (Tubeless) |
|---|---|
| Cold Tire Pressure — Solo Riding |
Front: 175 kPa / 1.75 bar / 25 PSI Rear: 200 kPa / 2.00 bar / 29 PSI |
| Cold Tire Pressure — 2-Up / Loaded Touring |
Front: 175 kPa / 1.75 bar / 25 PSI Rear: 250 kPa / 2.50 bar / 36 PSI |
| OEM Spark Plug & Quantity | NGK CR7E / MR8E-9 × 1 (Gap: 0.7–0.8 mm) |
| OEM Battery Code & Rating | FTZ9-BS / YTX12-BS (12V 8.0–10Ah MF AGM) |
| Final Drive Maintenance | Dry V-Belt CVT Drive — Inspect/replace V-belt and rollers every 20,000–24,000 km |
| Brake Fluid & Coolant | DOT 4 · Silicate-free ethylene-glycol OAT coolant for aluminum radiators (50:50 premix) |
3. Ergonomics, Range & Scheduled Service Intervals
| Displacement · Max Power · Peak Torque | 200 cc · 18.4 hp @ 8,000 rpm · 17 N·m (12.5 lb-ft) @ 6,000 rpm |
|---|---|
| Seat Height & Wet Curb Weight | 735 mm (28.9 in) · 163 kg (359 lbs) |
| Fuel Tank & Est. Real-World Range | 10.5 L (2.8 US gal) · ~30.5 km/L → ~320 km (199 mi) |
| OEM Scheduled Maintenance Intervals |
• First Break-In: 1,000 km • Engine Oil / Filter: 6,000 km / 12,000 km • Air Filter / Spark Plug: 12,000 km / 12,000 km • Valve Clearance Check: 24,000 km |
4. Generation Cutoffs & Real-World Wrenching Gotchas
Model-Year & Chassis Generation Notes
Launched globally in 2014 (UH200A / CH41A), pairing a 200cc liquid-cooled 4-valve single with Nissin ABS, a class-low 735 mm seat, and a 41 L dual-helmet underseat bay.
Oil & Clutch Mechanical Engineering Note
Running a dry centrifugal CVT, the UH200 takes 1.3 L of SAE 10W-40 JASO MB oil with internal element HF132, checked upright through a lower right-side sight glass.
Garage Wrenching Gotchas
- Its FTX9-BS battery hides behind a stepped panel inside the lower front leg-shield rather than under the seat—use plastic trim tools so tabs do not snap.
- Clean the foam CVT cooling air filter element at the front of the left belt cover every 5,000 km; a clogged foam pad cooks V-belts prematurely.
5. Frequently Asked Questions (FAQ)
What are the engine oil and rear hub gear oil capacities for the Suzuki Burgman 200 scooter?
With an isolated dry CVT belt case, the engine requires 1.2 L drain-only or 1.3 L (1.37 US qt) with filter/screen (16510-05240 / HF132) of SAE 10W-40 (JASO MB). Service the rear reduction hub separately (final drive 190 ml).
How do you accurately check the oil level on the Burgman 200, and what are its service intervals?
Hold the motorcycle dead-vertical on level ground 2–3 minutes after warm shutdown and verify the oil sits mid-way between the Upper and Lower marks in the crankcase sight glass—never on the sidestand. Torque the drain plug to 23 N·m with a new crush washer. Factory oil change intervals are every 6,000 km, with valve clearance inspection every 24,000 km.
What are the cold tire pressures, puncture repair type, seat height, and range of the Burgman 200?
Fitted with 110/90-13 M/C 56P front and 130/70-12 56P rear tubeless rims (compatible with roadside plug kits), set cold tire pressures to 25 / 29 PSI (175/200 kPa) solo or 25 / 36 PSI loaded. Seat height is 735 mm (28.9 in) at 163 kg wet weight, delivering ~320 km per 10.5 L tank.