Yamaha MT-09 SP (RN96 Brembo Stylema) — OEM Fluid, Tire Pressure & Maintenance Specs
890cc Liquid-Cooled Inline-3 CP3 (Brembo Stylema / Öhlins / Keyless) · Source: Yamaha MT-09 SP (RN96 Brembo Stylema) (2024–Present) Official Owner’s Manual Maintenance Specifications
According to the Yamaha MT-09 SP (RN96 Brembo Stylema) (2024–Present) Official Owner’s Manual Maintenance Specifications, the 2024–Present Yamaha MT-09 SP (RN96 Brembo Stylema) (chassis RN96/BML) requires 2.8 L (2.96 US qt) of SAE 10W-40 (JASO MA2, API SG or higher) engine oil for a drain-only change and 3.2 L (3.38 US qt) with filter service (5GH-13440-80 / HF204). Standard solo cold tire pressure is 250 kPa / 2.50 bar / 36 PSI front (120/70ZR17M/C (58W)) and 290 kPa / 2.90 bar / 42 PSI rear (180/55ZR17M/C (73W)), paired with 3× NGK LMAR9A-9 / CPR9EA-9 spark plug(s) and a YTZ10S battery.
Drain only: 2.8 L (2.96 US qt)
R 290 kPa (2.90 bar)
Est. Range: ~280 km (174 mi)
1. Engine Lubrication, Filter & Clutch Specifications
| Clutch Architecture | Wet Multi-Plate Manual Clutch NEVER use JASO MB |
|---|---|
| Recommended Viscosity & Grade | SAE 10W-40 (Alt: SAE 10W-50) · JASO MA2 · API SG or higher |
| Oil Volume (Drain / With Filter / Overhaul) |
• Drain only: 2.8 L (2.96 US qt) • With filter/strainer: 3.2 L (3.38 US qt) • Complete dry overhaul: 3.5 L (3.70 US qt) |
| OEM Oil Filter Code & Type | 5GH-13440-80 / HF204 |
| Correct Oil Level Check Method | Hold bike upright on level ground 3–5 min after warm shutdown; read crankcase sight glass |
| Oil Drain Bolt Torque | 43 N·m (31.7 lb-ft / 4.38 kgf·m) — Use fresh crush washer |
2. Cold Tire Pressures, Wheels, Ignition & Drivetrain
| Front / Rear OEM Tire Sizes | Front: 120/70ZR17M/C (58W) · Rear: 180/55ZR17M/C (73W) (Tubeless) |
|---|---|
| Cold Tire Pressure — Solo Riding |
Front: 250 kPa / 2.50 bar / 36 PSI Rear: 290 kPa / 2.90 bar / 42 PSI |
| Cold Tire Pressure — 2-Up / Loaded Touring |
Front: 250 kPa / 2.50 bar / 36 PSI Rear: 290 kPa / 2.90 bar / 42 PSI |
| OEM Spark Plug & Quantity | NGK LMAR9A-9 / CPR9EA-9 × 3 (Gap: 0.8–0.9 mm) |
| OEM Battery Code & Rating | YTZ10S (12V 8.6Ah MF AGM) |
| Final Drive Maintenance | 525 Heavy-Duty Sealed X-Ring Chain — Maintain 25–35 mm slack and clean/lube regularly |
| Brake Fluid & Coolant | DOT 4 · Silicate-free ethylene-glycol OAT coolant for aluminum radiators (50:50 premix) |
3. Ergonomics, Range & Scheduled Service Intervals
| Displacement · Max Power · Peak Torque | 890 cc · 119 hp @ 10,000 rpm · 93 N·m (68.6 lb-ft) @ 7,000 rpm |
|---|---|
| Seat Height & Wet Curb Weight | 825 mm (32.5 in) · 194 kg (428 lbs) |
| Fuel Tank & Est. Real-World Range | 14 L (3.7 US gal) · ~20 km/L → ~280 km (174 mi) |
| OEM Scheduled Maintenance Intervals |
• First Break-In: 1,000 km • Engine Oil / Filter: 10,000 km / 20,000 km • Air Filter / Spark Plug: 20,000 km / 20,000 km • Valve Clearance Check: 40,000 km |
4. Generation Cutoffs & Real-World Wrenching Gotchas
Model-Year & Chassis Generation Notes
Stepping beyond the 2021–2023 RN69 SP, the 2024+ Gen 4 MT-09 SP (RN96) adds Brembo Stylema front calipers, keyless ignition, acoustic tank grilles, and TRACK YRC modes.
Oil & Clutch Mechanical Engineering Note
Supporting high-load Gen-3 bidirectional quickshifts and slipper clutch action, refill 3.2 L of SAE 10W-40 JASO MA2 full-synthetic oil with spin-on filter HF204.
Garage Wrenching Gotchas
- Relieve side-load on the steering lock pin by nudging the handlebars slightly before turning the keyless main switch knob, preventing solenoid bind.
- Avoid buffing paste wax onto the acoustic amplifier mesh grilles atop the 14 L fuel tank, as dried residue clogs the sound-duct perforations.
5. Frequently Asked Questions (FAQ)
What oil volume, JASO grade, and oil filter code does the Yamaha MT-09 SP (RN96 Brembo Stylema) (2024–Present) require?
Because its wet multi-plate clutch shares engine oil with the gearbox, run SAE 10W-40 (JASO MA2) at 2.8 L (2.96 US qt) drain-only and 3.2 L (3.38 US qt) with filter (5GH-13440-80 / HF204).
How do you accurately check the oil level on the MT-09 SP (RN96 Brembo Stylema), and what are its service intervals?
Hold the motorcycle dead-vertical on level ground 2–3 minutes after warm shutdown and verify the oil sits mid-way between the Upper and Lower marks in the crankcase sight glass—never on the sidestand. Torque the drain plug to 43 N·m with a new crush washer. Factory oil change intervals are every 10,000 km, with valve clearance inspection every 40,000 km.
What are the cold tire pressures, puncture repair type, seat height, and range of the MT-09 SP (RN96 Brembo Stylema)?
Fitted with 120/70ZR17M/C (58W) front and 180/55ZR17M/C (73W) rear tubeless rims (compatible with roadside plug kits), set cold tire pressures to 36 / 42 PSI (250/290 kPa) solo or 36 / 42 PSI loaded. Seat height is 825 mm (32.5 in) at 194 kg wet weight, delivering ~280 km per 14 L tank.